Why switch
Common challenges with conventional degassing in CIP lines
Conventional degassing equipment that cannot integrate into CIP lines creates ongoing burdens — disassembly cleaning, hygiene risks, and reduced uptime.
Cannot integrate into CIP lines
Conventional degassing requires disassembly cleaning. Non-CIP-compatible units must be removed from the line for every wash cycle.
Cleaning residue risks
Filters and mesh trap residue in their gaps, creating hygiene risks and increasing cleaning validation burden.
Disassembly & reassembly burden
Time-consuming disassembly cleaning and reassembly of degassing equipment reduces production line uptime.
Rising hygiene management costs
Labor for disassembly cleaning, cleaning validation, and parts management accumulate, driving up costs.
Value of switching
Why customers choose the Bubble Eliminator for CIP lines
01
CIP compatible — no disassembly needed
Sanitary type with ferrule connections. Integrates directly into CIP lines, maintaining hygiene without disassembly cleaning.
02
Hygiene risks structurally eliminated
Zero filters, mesh, or moving parts. Cleaning residue and contamination risks are eliminated by design.
03
24/7 continuous operation for quality
Inline continuous degassing keeps bubbles under control without stopping the line — including during CIP cycles. Maintains yield and quality.
04
Food & pharmaceutical grade materials
SUS316L sanitary construction as standard. Also available in SUS304, PVC, and H-PVC to match your process fluid.
How it works
Dual Cyclone Technology — No Dedicated Power
Fluid enters using existing line pressure.
A swirl flow leverages density differences
to concentrate bubbles along the central axis
for continuous removal. No additional power source needed.
01
Generate swirl flow
Fluid enters under existing line pressure, and a proprietary internal structure generates a high-speed swirl flow.
02
Gas-liquid separation
Density differences between gas and liquid concentrate bubbles along the central axis of the vortex.
03
Continuous removal
Separated bubbles are continuously discharged from the system without interrupting flow.
The result:
zero dedicated power,
zero consumable parts,
completely maintenance-free.
zero dedicated power,
zero consumable parts,
completely maintenance-free.
Before / After
What changes when you switch
CONVENTIONAL DEGASSING
×Degassing equipment requires disassembly cleaning
×Must remove from CIP line for cleaning
×Filter/mesh residue risks
×Production stops for disassembly & reassembly
×Rising hygiene management workload & costs
BUBBLE ELIMINATOR
✓CIP compatible, no disassembly
✓Clean in place without removal
✓No filters or mesh — zero residue
✓24/7 continuous operation, no stoppages
✓Reduced hygiene management workload & costs
Applications
Solving bubble problems
across diverse production lines
SEMICONDUCTOR
Semiconductor & electronics cleaning
Removes bubbles from cleaning fluids to prevent adhesion defects and uneven cleaning results.
COATING
Coating & surface treatment
Eliminates bubbles from coating fluids to reduce streaks, pinholes, and surface defects.
FOOD & BEVERAGE
Food & beverage filling
Pre-fill degassing stabilizes measurement accuracy and ensures consistent fill quality.
ANALYSIS
Analytical & measurement instruments
Removes bubbles from flow channels to prevent measurement noise and signal disturbances.
* Results may vary depending on operating conditions.
FAQ
Frequently asked questions
The sanitary type (BS-C/BS models) is fully CIP compatible.
With ferrule connections, CIP cleaning can be performed while the unit remains installed in the line.
With ferrule connections, CIP cleaning can be performed while the unit remains installed in the line.
With no filters, mesh, or moving parts, standard CIP cleaning is sufficient to maintain cleanliness. Disassembly cleaning is not required.
SUS316L, SUS304, SS400 equivalent, PVC, and H-PVC — selected to match your process fluid requirements.
1 L/min and above, with no upper limit on maximum flow rate.
With its low pressure drop, omnidirectional installation, and ferrule connections,
the unit can be spliced into existing CIP lines. Connection ports and configuration are custom-engineered to match your system.
the unit can be spliced into existing CIP lines. Connection ports and configuration are custom-engineered to match your system.
Device configuration, connections, and materials are custom-engineered to match your line,
so standard specifications vary by application. Please contact us for details — we will propose the optimal configuration.
so standard specifications vary by application. Please contact us for details — we will propose the optimal configuration.